Push the vacuum forward slowly while pressing it down slightly to ensure good contact with the carpet. Pull the vacuum back, slightly overlapping the previous pass. Repeat this movement back and forth, covering the entire area. Start by taking the carpet out from the outside and Shake it.
Take it inside and then place it with the bottom side up. Check the settings of the vacuum cleaner and adjust it to place carpets, if possible. Start by vacuuming the underside of the carpet to remove dirt and push it toward the surface, so it will be easier to vacuum it when you turn it over. Go back and forth (twice) as you superimpose your past.
Vacuum cleaners rely on airflow to suck dirt and dust out of carpets. To maintain adequate airflow and excellent suction, you must use the correct vacuum height. A vacuum head with adjustable height is a must if you have different styles of carpets in your home. Before starting your cleaning routine, be sure to check the recommended height for your carpet.
The right settings make a significant difference in carpet cleaning. Whether you're using a cordless vacuum or a specific vacuum for pet hair, the key to getting the cleanest possible cleaning is to go slowly. Start at the far edge of the carpet or rug and push the vacuum forward in a straight line. This movement lifts the layer (or fibers) of the floor covering to reveal any dirt or debris hidden underneath. Then, pull the machine slowly toward you to pick up all the debris.
For the next row, overlap the first row by approximately 50% and repeat the process until the entire surface has been cleaned. I also like to put half a cap or cap full of drops to wash Tide clothes so that, when I vacuum them, they fill my house with that clean scent.
